Filter
Top Products
Operational Features
5-256 41-001343-02 REV04 – 05.2014
Action URI Disconnected
The phones have a parameter, “action uri disconnected” that allow a disconnect event to occur when the phone transi-
tions from any active state (outgoing, incoming, connected, or calling) to an idle state. This parameter can use the varia-
ble “$$LINESTATE$$”.
If the Administrator enables this feature (by specifying a disconnect URI), when a call is disconnected, the phone checks
to see if the event has a Disconnect URI configured. If the phones finds a configured URI with a $$LINESTATE$$ variable,
it replaces the $$LINESTATE$$ variable with the appropriate line state of the current active line. After all of the variables
are bound, the phone executes a GET on the URI. The following table lists the applicable values for the $$LINESTATE$$
variable.
Aastra Web UI
1. Click on Advanced Settings->Action URI.
2. In the “Connected” field, enter a valid URI for which the phone executes a GET on, when it goes into the “connected” state. Leaving this field
empty disables the Action URI Connected feature. For example,
http://www.example.com/connect.php
3. Click Save Settings to save your settings.
Note:
The $$LINESTATE$$ variable is optional and not required when enabling the “action uri disconnected” parameter.
$$LINESTATE$$ Value Description Meaning in a Disconnected URI
IDLE Phone is idle. N/A
DIALING Phone is offhook and ready to dial. N/A
CALLING A SIP INVITE was sent but no response was received. Error occurred during the call.
OUTGOING Remote party is ringing. Call was cancelled.
INCOMING Local phone is ringing. Call was missed or cancelled.