Filter
Top Products
Administrator Level Options
41-001343-02 REV04 – 05.2014 3-10
The following is a description of the information on the Status screen:
• Network Status
– Displays the network status of the Ethernet ports at the back of the phone. You can also view the phone’s IP and MAC
addresses. Information in this field includes Link State, Negotiation, Speed, and Duplex for Port 0 and Port 1.
• Hardware Information
– Displays the current IP phone platform and the revision number.
• Firmware Information
– Displays information about the firmware that is currently installed on the IP phone. Information in this field includes
Firmware Version, Firmware Release Code, Boot Version, Release Date/Time.
• SIP Status
– Displays information about the SIP registration status of the phone. If there are accounts configured on the IP Phone,
their SIP status displays in this field. All model phones display the status of up to 9 lines.
The following table describes the status conditions that can display for an account(s).
Status Condition Description
Registered Displays this status on accounts that HAVE been registered with the SIP proxy server.
Example:
Backup
Registrar
Line SIP Account Status Used?
1 650@proxy.com:5060 Registered Yes
where
Account Number is “1”
SIP Account is “650@proxy.com” on port “5060”
Status is “Registered”
Backup registrar is used (“Yes”)
SIP Error Number Displays on accounts when registration fails with the SIP proxy server.
Example:
Backup
Registrar
Line SIP Account Status Used?
4 653@proxy.com:5060 401 No
where
Account Number is “4”
SIP Account is “653@proxy.com” on port “5060”
Status is “401” - Unregistered if SIP registration fails.
Backup registrar is used (“No”)
Note:
The IP Phones can register with multiple server using the same user name. So the SIP Status information on the Status
screen may display the same account with different registrar and proxy IP addresses. For more information, see