Filter
Top Products
Operational Features
41-001343-02 REV04 – 05.2014 5-123
Press-and-Hold Speeddial Keypad Keys
The keypad keys on the IP phones can be used to store speeddial numbers that are dialed out when a user presses and
holds the respective key. These press-and-hold speeddial numbers can be configured using the IP phone UI, the Aastra
Web UI, or by defining the “pnhkeypadN value” and “pnhkeypadN line” parameters in the configuration files.
Configuring Press-and-Hold Speeddial Keypad Keys
You can program one speeddial number for each applicable keypad key (keys 1 through 9). For information on how to
configure the press-and-hold keypad keys using the IP phone UI, please refer to the respective phone model’s Aastra SIP IP
Phone User Guide.
Use the following procedures to configure the press-and-hold keypad keys.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,“Press-and-Hold Speeddial Keypad Key Settings” on pageA-
174.
Aastra Web UI
1. Click on Operation->Keypad Speed Dial.
2. Select the keypad key you want to program.
3. In the “Value” field, enter the speeddial number.
4. In the "Line" field, select the line number you want the phone to use when dialing the speeddial number.
5. Click Save Settings.