Filter
Top Products
Operational Features
41-001343-02 REV04 – 05.2014 5-261
Configuring XML SIP NOTIFY using the Aastra Web UI if an Empty SIP NOTIFY Message Received by the Phone
Use the following procedure in the Aastra Web UI to configure the XML SIP NOTIFY parameter when the phone receives an
empty SIP NOTIFY message.
XML Softkey URI
In addition to specifying variables for the Action URIs, you can also specify variables in the XML softkey URIs that are
bound when the key is pressed. These variables are the same as those used in the Action URIs.
2. The “XML SIP Notify" field is disabled by default. To enable this field, check the box.
This field enables or disables the phone to accept or reject an aastra-xml SIP NOTIFY message.
Note:
To ensure the SIP NOTIFY is coming from a trusted source, it is recommended that you enable the Whitelist feature (Whitelist Proxy param-
eter) on the IP phone. If enabled, and the phone receives a SIP NOTIFY from a server that is NOT on the whitelist (i.e. untrusted server), the
phone rejects the message.
3. Click Save Settings to save your changes.
Aastra Web UI
1. If the content is missing in the SIP NOTIFY message received by the phone, the phone automatically uses the value you specify for the Action
URI XML SIP Notify parameter at the path Advanced Settings->Action URI.
Click on Advanced Settings->Action URI.
2. Specify a URI to be called when an empty XML SIP NOTIFY is received by the phone.
For example:
http://myserver.com/myappli.xml
Note:
The sip xml notify event parameter at the path Advanced Settings->Global SIP->Advanced SIP Settings must be enabled.
3. Click Save Settings to save your changes.
Aastra Web UI