Filter
Top Products
Operational, Basic, and Advanced Parameters
41-001343-02 REV04 – 05.2014 A-10
Parameter –
dns1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Primary DNS server IP address. For any of the IP address settings on the IP phone a
domain name value can be entered instead of an IP address. With the help of the DNS
servers the domain names for such parameters can then be resolved to their correspond-
ing IP addresses.
Note:
For DHCP to automatically populate this parameter, your DHCP server must support
Option 66.
Format IP address
Default Value 0.0.0.0
Range Not Applicable
Example dns1: 192.168.0.5
Parameter –
dns2
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description A service that translates domain names into IP addresses. To assign static DNS addresses,
disable DHCP.
Note:
For DHCP to automatically populate this parameter, your DHCP server must support
Option 66.
Format IP address
Default Value 0.0.0.0
Range Not Applicable
Example dns2: 192.168.0.6
Parameter –
ethernet port 0
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The send (TX) and receive (RX) method to use on Ethernet port 0 to transmit and receive
data over the LAN.
Format Integer
Default Value 0
Range 0 - Auto Negotiate
1 - Full Duplex, 10Mbps
2 - Full Duplex, 100Mbps
3 - Full Duplex, 1000Mbps (applicable for the 6739i, 6735i, 6737, 6865i, and 6867i IP
phones only)
4 - Half Duplex, 10Mbps
5 - Half Duplex, 100Mbps
6 - Half Duplex, 1000Mbps (applicable for the 6739i, 6735i, 6737, 6865i, and 6867i IP
phones only)
Example ethernet port 0: 4