Filter
Top Products
Operational Features
5-128 41-001343-02 REV04 – 05.2014
Speeddial Prefixes
The normal function of the Speeddial option allows you to configure a specific key on the phone to dial a number
quickly by pressing the configured key. For example, if you had the following Speeddial configuration in the configura-
tion files:
softkey1 type: speeddial
softkey1 label: Office
softkey1 value: 5552345
softkey1 line: 1
after you press softkey1 on the phone, it dials the Office number at 555-2345 on line 1.
A new feature for the Speeddial option allows you to configure a preset string of numbers followed by a “+”. This feature
allows the phone to speeddial a prefix number and then pause to let you enter the remaining phone number. You can
use this feature for numbers that contain long prefixes. For example, if you had the following Speeddial configuration in
the configuration files:
softkey2 type: speeddial
softkey2 label: Europe Office
softkey2 value: 1234567+
softkey2 line: 2
after you press softkey2 on the phone, it dials the prefix number automatically and pauses for you to enter the remaining
number using the keypad on the phone.
You can configure the Speeddial prefix using the configuration files or the Aastra Web UI.
Enabling/Disabling Ability to Add or Edit a Speeddial Key
The IP Phones allow you to set a parameter, “speeddial edit” using the configuration files that allows you to enable or
disable the ability to add a Speeddial key or edit a Speeddial key from the IP Phone UI. Disabling this parameter prevents
a user from adding or editing a Speeddial key.
The default for this parameter is enabled, allowing you to create and edit Speeddial keys on the phone using the Press-
and-hold feature, softkeys, programmable keys, expansion module keys and key pad, Speeddial menu in the IP Phone UI,
and the SAVE TO key.
If this parameter is set to disabled, it blocks the user from using any of the features on the phone to create or edit a
Speeddial key.
Enabling/Disabling the Ability to Add or Edit a Speeddial Key Using the Configuration Files
Use the following procedure to enable/disable the ability to add and edit a Speeddial key.
Busy Lamp Field (BLF)
The BLF feature on the IP phones allows a specific extension to be monitored for state changes. BLF monitors the status
(busy or idle) of extensions on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “” on pageA-191.
Note:
BLF feature availability is dependant on your call manager.