Filter
Top Products
Administrator Level Options
41-001343-02 REV04 – 05.2014 3-14
Settings Factory Defaults Using the Aastra Web UI
Erasing the Phone’s Local Configuration
You can reset the IP Phone’s local configuration if required. The local configuration is the last updated configuration you
performed using the IP Phone UI or the Aastra Web UI. Performing this action results in losing all recently user-modified
settings. For more information about local configuration, see Chapter 1, the section, “Configuration File Precedence” on
page1-51.
Erasing the Phone’s Local Configuration Using the IP Phone UI
Aastra Web UI
1. Click on Operation->Reset->Current Settings.
2. In the "Restore to Factory Defaults" field, click Restore.
This restores all factory defaults, and removes any saved configuration and directory list files.
IP Phone UI
1. Press the Options key on the phone to enter the Options List.
2. Select Administrator Menu and enter your Administrator Password (default is 22222).
3. Select Erase Local Config.
4. For 3-Line LCD Displays:
The “Erase local config?” prompt displays.
Press # to confirm.
For 8 and 11-Line LCD Displays:
The “Erase local config?” prompt displays.
Press Erase to confirm.
For the 6739i:
1. Press the Options key on the phone to enter the Options List.
2. Press the Advanced button. A keyboard displays.
3. Enter the Administrator password using the keyboard, and press <Enter>. Default is “22222”.
4. Press the Reset button. A “Reset Configuration?” prompt displays.
5. Press the Erase Local Cfg. button.
The phone immediately erases the local configuration on the phone and the phone reboots.
For the 6867i:
1. Press the Options key on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password and press Enter. Default is “22222”.