Filter
Top Products
Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key
A-175 41-001343-02 REV04 – 05.2014
Handset Feature Key Settings
Note:
Applicable to the 9480i CT and 6757i CT IP Phones only.
Parameter –
featurekeyN type
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The type of feature key to configure. Valid types are:
• none - Indicates key is disabled.
• line - Indicates key is configured for line use. Value can be: line1, line2, line3, line4,
line5, line6, line7, line8, or line9.
• xfer- Indicates key is configured for transferring a call.
• conf - Indicates key is configured for conference calling.
• public - Indicates key is configured to toggle from public to private mode. A public
and private softkey can be used when at a line item in the Directory List. The Private
key toggles a number in the Directory List to private. The Public key allows a number
in the Directory List to be sent to the handsets. A 6757i CT accepts a maximum of 50
entries with the public attribute.
• icom - Indicates key is set to be used to make an intercom call.
• directory - Indicates key is set for accessing the Directory List.
• callers - Indicates key is set for accessing the Callers List.
• park- Indicates key is configured to park incoming calls when pressed.
• pickup- Indicates key is configured to pick up parked calls when pressed.
• flash - Indicates key is set to generate a flash event when it is pressed CT handsets. The
IP phone generates flash events only when a call is connected and there is an active
RTP stream (for example, when the call is not on hold).
Format Text
Default Value None
Range none
line1, line2, line3, line4, line5, line6, line7, line8, line9
transfer
conference
public
icom
directory
callers (“Callers List” in Aastra Web UI)
park
pickup
flash
Example featurekey1 type: line3
featurekey2 type: public
featurekey3 type: park
featurekey4 type: pickup