Filter
Top Products
Operational Features
5-66 41-001343-02 REV04 – 05.2014
Call Hold Reminder (on Single Hold)
In previous releases, the call hold reminder ring splash was triggered when you hung up a call and there was at least one
other call on hold. The reminder ring splash timer started only when the active call hung up and there was still another
call on hold.
On the IP phones, a User or Administrator can enable or disable a feature that would start the reminder ring splash timer
as soon as you put a call on hold (even when no other calls are active on the phone). When enabled, the phone initiates a
reminder ring splash periodically for the single call on hold. When disabled, no reminder ring splash is audible.
You can enable or disable this feature using the “call hold reminder” parameter in the configuration files or in the Aastra
Web UI.
Configuring “Call Hold Reminder”
You use the following procedure to enable or disable “Call Hold Reminder”.
Configuration Files
For the specific parameter you can set in the configuration files for enabling/disabling “Call Hold Reminder”, see Appendix A, the section, “Call Hold
Reminder Settings” on pageA-123.
Aastra Web UI
1. Click on Basic Settings->Preferences->General.
2. The "Call Hold Reminder" field is disabled by default. To enable this feature, place a check mark in the box.
When this feature is enabled, the reminder ring splash timer starts as soon as you put a call on hold (even when no other calls are active on
the phone).The phone initiates a reminder ring splash periodically for the single call on hold. When disabled, no reminder ring splash is audi-
ble.
3. Click Save Settings to save your changes.