Filter
Top Products
Operational Features
41-001343-02 REV04 – 05.2014 5-255
Action URI Connected
A parameter called “action uri connected” (configuration files) and “Connected” (Aastra Web UI) now allows XML scripts
to determine when a call is connected. When enabled, the phone triggers an HTTP GET when it goes into the “connected”
state. This includes regular phone calls, intercom calls, paging calls, RTP streaming, and the playing of a WAV file. It is also
triggered when the phone establishes the second leg of a 3-way call.
This parameter can use the following variables:
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$INCOMINGNAME$
• $$PROXYURL$$
• $$LINESTATE$$
• $$CALLDIRECTION$$
• $$LOCALIP$$
• $$DISPLAYNAME$$
• $$CALLDURATION$$
• $$REGISTRATIONSTATE$$
• $$REGISTRATIONCODE$$
If the Administrator enables this feature (by specifying a connect URI), when a call is connected, the phone checks to see if
the event has a Connect URI configured. If the phones finds a configured URI it executes an XML script or the variable if
defined.
Example
In the configuration files, you can enter the following:
action uri connected: http://www.example.com/connect.php
An Administrator can enable the “Connected” Action URI feature using the configuration files or the Aastra Web UI.
Limitations
• During SLA calls, the phone uses the Action URI Connected parameter when the line is seized before the caller dials out.
• SCA and BLA calls on hold trigger the Action URI Connected parameter, since the retrieval is a 2nd call by the phone,
and the phone cannot link the retrieved call with the earlier held call.
For more information about the XML API objects, see the Aastra XML Developers Guide.
Configuring the Action URI Connected Feature
Use the following procedure to configure the Action URI Connected feature on the phone.
3. In the “Interval” field, enter the interval, in seconds, between calls from the phone to the "action uri poll". The value of “0” is disabled.
4. Click Save Settings to save your changes.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Action URI Settings” on pageA-116.
Aastra Web UI