Filter
Top Products
Operational Features
5-50 41-001343-02 REV04 – 05.2014
You can lock and unlock keys using the configuration files only. When viewing the locked key via the Aastra Web UI, the
key is grayed out (disabled) and cannot be changed. Locking is dynamic for XML pushes.
You use the following “locking” parameters in the configuration files to lock the softkeys and/or programmable keys on
all the phones. If no key settings are configured locally, the locking parameters impact existing softkey and programma-
ble key parameters defined in the configuration files as detailed in the table below.
Locking the IP Phone Keys using the Configuration Files
Use the following procedures to lock the softkeys and programmable keys on the IP phone.
Locking Parameter Impacted Parameters Applicable Phone Models
softkeyN locked softkeyN type
softkeyN label
softkeyN value
softkeyN line
softkeyN states
9480i
9480i CT
6735i
6737i
6739i
6755i
6757i
6757i CT
6867i
topsoftkeyN locked topsoftkeyN type
topsoftkeyN label
topsoftkeyN value
topsoftkeyN line
6737i
6757i
6757i CT
6867i
prgkeyN locked prgkeyN type
prgkeyN value
prgkeyN line
9143i
6730i
6731i
6735i
6753i
6755i
6863i
6865i
pnhkeypadN locked pnhkeypadN value
pnhkeypadN line
All IP phone models
featurekeyN locked featurekeyN type
featurekeyN label
9480i CT
6757i CT
expmodX keyN locked expmodX keyN type
expmodX keyN label (M675i only)
expmodX keyN value
expmodX keyN line
6700i and 6800i-series phones only
(not applicable to the 6730i, and 6731i)
hardkeyN locked hardkeyN type
hardkeyN value
hardkeyN line
6867i
Note:
The 3-line LCD phones prevent users from setting a Speeddial key via the Phone UI on a key that has been locked.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,“Locking Keys” on pageA-187.