Filter
Top Products
Operational Features
5-90 41-001343-02 REV04 – 05.2014
Ring Tone via Speaker During Active Calls
The parameter “ring audibly enable” can be used to configure the IP phones to play the ring tone of an incoming call
via the phone’s speaker while in an active call or if a user is in the process of dialing out.
With the parameter enabled, if a user is in an active call on an extension, and the phone receives a call for the same or dif-
ferent extension, the incoming call will be represented by the call’s ring tone being played through the speaker as well as
the respective line’s LED flashing. This is also the case if a user is in the process of dialing out to a remote number and the
phone receives a call for any line other than the line that is being used to dial out. When the phone exits the ringing state
(e.g. the incoming call is answered), the tone device of the phone will revert back to originally configured audio device.
Feature compatibility is dependant on the IP phone model (see the following table for compability details).
Aastra Web UI
1. Click on Basic Settings->Preferences.
For global configuration:
2. In the "Ring Tones" section, select a country from the "Tone Set" field.
Valid values are Australia, Brazil, Europe, France, Germany, Italy, Italy2, Malaysia, Mexico, Brazil, Russia, Slovakia, UK, and US. Default
is US
3. Select a value from the "Global Ring Tone" field.
Note:
See the “Ring Tone Settings Table” on page5-87 for valid values.
For per-line configuration:
4. In the "Ring Tone" section, select a line for which you want to set ring tone.
5. Select a value from the "LineN" field.
Note:
See the “Ring Tone Settings Table” on page5-87 for valid values.
6. Click Save Settings to save your changes.
IP Phone Handset Audio Mode Speaker Audio Mode
9143i
XX
9480i and 9480i CT
✓
X
6730i
XX
6731i
XX