Filter
Top Products
Administrator Level Options
41-001343-02 REV04 – 05.2014 3-16
Basic Settings
An Administrator has access to specific Basic Setting options to configure and manage the IP Phone in the network. The
following sections identify the options available to an Administrator only, or where indicated, to a User and Administrator.
These tables also identify whether you can configure them using the Aastra Web UI, IP Phone UI, or the configuration files.
General Settings
Parameter in
Aastra Web UI
Parameter in Configuration
Files
Description
Local Dial Plan sip dial plan A dial plan that describes the number and pattern of digits that a user dials to reach
a particular telephone number. Dial Plan field accepts up to 512 characters.
For more information on this feature, see “Local Dial Plan” on page5-52.
Send Dial Plan Terminator sip dial plan terminator Specifies whether or not pressing the hash/pound (i.e. "#") key, while performing an
outgoing call on an open line, should be sent as %23 to the proxy in the dial string or
if the key should be used as a dial plan terminator (i.e. dials out the call immediately).
For more information on this feature, see “SIP Dial Plan Terminator” on page5-53.
Digit Timeout sip digit timeout Represents the time, in seconds, to configure the timeout between consecutive key
presses.
For more information on this feature, see. “Digit Timeout” on page5-53.
Park Call
Note:
This option can be set by both
Users and Administrators.
sip lineN park pickup config The parking of a live call to a specific extension.
This feature on the Basic Preferences screen is available on all phones EXCEPT
the 9143i, 6753i, 6863i, and 6865i.
To configure the Park feature on a key, see Chapter 5, the section, “Park/Pick Up Static
and Programmable Configuration” on page5-177.
Pick Up Parked Call
Note:
This option can be set by both
Users and Administrators.
sip lineN park pickup config Picking up a parked call at the specified extension.
This feature on the Basic Preferences screen is available on all phones EXCEPT
the 9143i, 6753i, 6863i, and 6865i.
To configure the Pickup feature on a key, see Chapter 5, the section, “Park/Pick Up
Static and Programmable Configuration” on page5-177.
N/A suppress dtmf playback Enables and disables suppression of DTMF playback when a number is dialed from
the softkeys or programmable keys.
For more information on this feature, see. “Suppressing DTMF Playback” on page5-
55.
Display DTMF Digits
Note:
This option can be set by both
Users and Administrators.
display dtmf digits Enables and disables the display of DTMF digits on the IP phone display during a con-
nected state.
For more information on this feature, see. “Display DTMF Digits” on page5-55.
Play Call Waiting Tone
Note:
This option can be set by both
Users and Administrators.
call waiting tone Enable or disables the playing of a call waiting tone when a caller is on an active call
and a new call comes into the phone.
For more information on this feature, see. “Call Waiting Tone” on page5-58.
Stuttered Dial Tone
Note:
This option can be set by both
Users and Administrators.
stutter disabled Enable or disables the playing of a stuttered dial tone when there is a message wait-
ing on the IP phone.
For more information on this feature, see. “Stuttered Dial Tone” on page5-61.