Filter
Top Products
Administrator Level Options
41-001343-02 REV04 – 05.2014 3-50
Auto-Resync Settings
N/A Mode auto resync mode Enables and disables the phone to be updated automatically
once a day at a specific time in a 24-hour period. This param-
eter works with TFTP, FTP, and HTTP servers.
Notes:
• If a user is accessing the Aastra Web UI, they are not
informed of an auto-reboot.
• Any changes made using the Aastra Web UI or the IP phone
UI are not overwritten by an auto-resync update. Auto-
resync affects the configuration files only. However, the
settings in the Aastra Web UI take precedence over the IP
phone UI and the configuration files.
• The resync time is based on the local time of the IP phone.
• If the IP phone is in use (not idle) at the time of the resync
check, the reboot occurs when the phone becomes idle.
• The automatic update feature works with both encrypted
and plain text configuration files.
For more information, see Chapter 8, the section, “Using the
Auto-Resync Feature” on page8-5.
N/A Time (24-hour) auto resync time Sets the time of day in a 24-hour period for the IP phone to
be automatically updated. This parameter works with TFTP,
FTP, and HTTP servers.
Notes:
• The resync time is based on the local time of the IP phone.
• The value of 00:00 is 12:00 A.M.
• When selecting a value for this parameter in the Aastra
Web UI, the values are in 30-minute increments only.
• When entering a value for this parameter using the config-
uration files, the value can be entered using minute values
from 00 to 59 (for example, the auto resync time can be
entered as 02:56).
For more information, see Chapter 8, the section, “Using the
Auto-Resync Feature” on page8-5.
N/A Maximum Delay auto resync max delay Specifies the maximum time, in minutes, the phone waits
past the scheduled time before starting a checksync.
For more information, see Chapter 8, the section, “Using the
Auto-Resync Feature” on page8-5.
N/A Days auto resync days Specifies the amount of days that the phone waits between
checksync operations.
Note:
A value of 0 causes the phone to checksync every time the
clock reads the proper time. A value of 1 forces the phone to
wait 24 hours prior to doing the first checksync.
For more information, see Chapter 8, the section, “Using the
Auto-Resync Feature” on page8-5.
XML Push Server List (Approved IP Addresses)
N/A XML Push Server List
(Approved IP Addresses)
xml application post list The HTTP server that is pushing XML applications to the IP
phone.
For more information, see Chapter 5, the section, “XML Push
Requests” on page5-242.
Parameter In
IP Phone UI
Parameter in
Aastra Web UI
Parameters in Configuration
Files
Description