Filter
Top Products
Operational Features
41-001343-02 REV04 – 05.2014 5-19
Custom Time Zone Support
A User or Administrator can also set a custom time zone on the phone to be configured with the Network Time Protocol
(NTP) server addresses. However, NTP provides the Coordinated Universal Time (UTC) time so the phone requires the offset
from UTC in order to deliver the correct local time.
On the IP Phone UI for 8 and 11-line phones, a User or Administrator can select Preferences->Time and Date->Time Zone-
>Others and choose “Custom” from the displayed time zone list.
On the IP Phone UI for 3-line phones, you select Preferences->Time and Date->Time Zone->Others and enter “Custom”
for the country code.
On the 6739i, a User or Administrator can select Set Time->Timezone->Others and choose “Custom” from the displayed
time zone list.
References
For more information about setting a custom timezone, see Appendix A, “Time Zone Name” on pageA-41.
Configuring Time and Date Using the Configuration Files
Use the following information to set a time and date format, time zone, and daylight savings time using the configuration
files.
Configuring Time and Date Using the IP Phone UI
Use the following procedure to set a time and date, time and date format, time zone, and daylight savings time using the
IP Phone UI.
Configuration Files
For specific date and time parameters you can set in the configuration files, see Appendix A, the section, “Time and Date Settings” on pageA-40.
For specific parameters you can set for custom time zone settings, see Appendix A, the section, “Custom Time Zone and DST Settings” on pageA-47.
IP Phone UI
1.
Press on the phone to enter the Options List.
Set Time Format:
2. Select Time and Date.
3. Select Time Format.
Valid values are 12 Hour and 24 Hour.
Note:
The default Time Format is 12 Hour.
4. Use the navigation keys to select the preferred time format.
5. Press Done to save the Time Format you selected.
Set Date Format:
6. Select Date Format.