Filter
Top Products
Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters
41-001343-02 REV04 – 05.2014 A-192
Enabling/Disabling Ability to Add/Edit Speeddial Keys
BLF List URI Settings
BLF Page Switch
Parameter –
speeddial edit
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows you to enable or disable the ability to add a Speeddial key or edit a Speeddial
key.
The default is enabled (Yes) allowing you to create and edit Speeddial keys on the
phone using the Press-and-hold feature, softkeys, programmable keys, expansion
module keys and key pad, Speeddial menu in the IP Phone UI, and the SAVE TO key.
If this parameter is set to disabled (No), it blocks the user from using any of the features
on the phone to create or edit a Speeddial key.
Format Boolean
Default Value 1 (Enabled)
Range 0 (Disabled)
1 (Enabled)
Example speeddial edit: 0
Parameter–
list uri
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the URI that the phone uses to access the BLF list on the Broadsoft server
when the BLF list key is pressed. When you specify a URI for this parameter, the phone
uses the Internet to access the BLF list on the Broadsoft server.
Format HTTP server path or Fully Qualified Domain Name
Default Value Not Applicable
Range Not Applicable
Example list uri: sip:9@192.168.104.13
Note:
Applicable to the 6735i, 6737i, 6739i, 6755i, 6757i, 6757i CT, and 6867i IP Phones only.
Parameter–
blf activity page switch
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables the phone to automatically switch the screen focus to an expansion module or
softkey page that has BLF activity.
Format Integer
Default value 0 (disabled)
Range 0-3
0 (disabled)
1 (switch page if monitored extension transitions to ringing (fast flashing) state)
2 (switch page if monitored extension transitions to either ringing (fast flashing) or
hold (slow flashing) state)
3 (switch page if monitored extension transitions to either ringing or hold state OR
from idle (off) state to “in call” (solid) state)
Example blf activity page switch: 1