Aastra Telecom 41-001343-02 IP Phone User Manual


  Open as PDF
of 876
 
Operational Features
41-001343-02 REV04 – 05.2014 5-253
3. Enter an XML URI for a successful registration in the “Successful Registration” field. For example:
http://10.50.10.14/registered.php?auth name=$$SIPAUTHNAME$$
This parameter specifies the URI for which the phone executes a GET on when a successful registration event occurs.
Note:
For a successful registration event, use the associated variables indicated in the table “Action URIs and Associated Variables” on page5-247.
The “Successful Registration” parameter executes on the first successful registration of each unique line configured on the phone.
4. Enter an XML URI in the “Registration Event” field, for when the phone performs registration. For example:
http://10.30.100.39/PHPtests/actionuri.php?action=RegEvt&regstate=$$REGISTRATIONSTATE$$&regcode=$$REGISTRATIONCODE$$
This parameter specifies the URI that the phone executes a GET on, when a registration event change occurs.
Note:
For a registration event, use the associated variables indicated in the table “Action URIs and Associated Variables” on page5-247.
5. Enter an XML URI for an incoming call event in the “Incoming Call” field. For example:
http://10.50.10.140/incoming.php?number=$$REMOTENUMBER$$
This parameter specifies the URI for which the phone executes a GET on when an incoming call event occurs.
Note:
For an incoming call event, use the associated variables indicated in the table “Action URIs and Associated Variables” on page5-247.
6. Enter an XML URI for an outgoing call event in the “Outgoing Call” field. For example:
http://10.50.10.140/outgoing.php?number=$$REMOTENUMBER$$
This parameter specifies the URI for which the phone executes a GET on when an outgoing call event occurs.
Note:
For an outgoing call event, use the associated variables indicated in the table “Action URIs and Associated Variables” on page5-247.
7. Enter an XML URI for an offhook event in the “Offhook” field. For example:
http://10.50.10.140/offhook.php?state=$$LINESTATE$$
This parameter specifies the URI for which the phone executes a GET on when an offhook event occurs.
Note:
For an offhook event, use the associated variables indicated in the table “Action URIs and Associated Variables” on page5-247.
8. Enter an XML URI for an onhook event in the “Onhook” field. For example:
http://10.50.10.140/onhook.php?state=$$LINESTATE$$
This parameter specifies the URI for which the phone executes a GET on when an onhook event occurs.
Note:
For an onhook event, use the associated variables indicated in the table “Action URIs and Associated Variables” on page5-247.
9. To configure a Connected event, see the section, “Action URI Connected” on page5-253.
10. To configure a Disconnected event, see the section, “Action URI Disconnected” on page5-254.
11. To configure an XML SIP Notify event, see the section, “XML SIP Notify Events” on page5-256.
Aastra Web UI
 previous next