Filter
Top Products
Network Settings
4-54 41-001343-02 REV04 – 05.2014
Use the following procedure to enable/disable the NTP server using the IP Phone UI.
Use the following procedure to enable/disable and configure the NTP Servers using the Aastra Web UI.
IP Phone UI
1.
Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Time and Date.
4. Select Timer Server 1, Timer Server 2, or Time Server 3.
5. Enter the IP Address (in dotted decimal) or qualified domain name for the Time Server.
6. Press Done to save the change.
For the 6739i:
1. Press the Options key on the phone to enter the Options List.
1. Press Set Time.
2. Press Timer Server 1, Time Server 2, or Time Server 3.
3. Enter the IP Address (in dotted decimal) or qualified domain name for the Time Server.
4.
Press to return to the idle screen.
For the 6867i:
1.
Press on the phone to enter the Options List.
2. Select Time and Date > Set Date and Time.
3. In the Timer Server 1, Time Server 2, and/or Time Server 3 fields, enter the respective IP address (in dotted decimal) or qualified domain
name.
4. Press the Save softkey.
Aastra Web UI
1. Click on Basic Settings->Preferences->Time and Date Setting.
2. Enable the "NTP Time Servers" field by checking the check box.
(Disable this field by unchecking the box). Default is disabled.
3. Enter an IP address or qualified domain name in the "Time Server 1", "Time Server 2", and/or "Time Server 3" field(s) to specify the location
of the NTP time server.
4. Click Save Settings to save your changes.