Filter
Top Products
Administrator Level Options
41-001343-02 REV04 – 05.2014 3-20
Group Paging RTP Settings
Key Mapping
Parameter in
Aastra Web UI
Parameter in Configuration
Files
Description
Paging Listen Addresses
Note:
This option can be set by both
Users and Administrators.
paging group listening Allows you to specify up to 5 listening multicast addresses to send/receive a Real
Time Transport Protocol (RTP) stream to/from these pre-configured multicast
addresses without involving SIP signaling.
For more information on this feature, see “Group Paging RTP Settings” on page5-82.
Parameter in
Aastra Web UI
Parameter in Configuration
Files
Description
Map Redial Key To map redial key to Sets the Redial key as a Speeddial key if a value is entered for this parameter. If you
leave this parameter blank, the Redial key returns to its original functionality.
Note:
If you configure the Redial key for speeddialing on the 9480i CT or 6757i CT Base Sta-
tions, the Redial key on the 9480i CT and 6757i CT handsets retain their original func-
tionality. The Redial key on the handset is not configured for speed dial.
For more information on this feature, see “Speeddial Key Mapping” on page5-84.
Map Conf Key To map conf key to Sets the Conf key as a Speeddial key if a value is entered for this parameter. If you
leave this parameter blank, the Conf key returns to its original functionality.
Note:
If you configure the Conf key for speeddialing on the 9480i CT or 6757i CT Base Sta-
tions, the Conf key on the 9480i CT and 6757i CT handsets retain their original func-
tionality. The Conf key on the handset is not configured for speeddial.
For more information on this feature, see “Speeddial Key Mapping” on page5-84.
NA map redial as dtmf The “Redial” key remappings has the same behavior as the “Speed Dial” key when the
phone is idle. During an active call the phone will send the custom number as DTMF
using the phone configured DTMF method (inbound vs out-of-band RFC2833 vs SIP
INFO).
When a user presses the Redial key, the mapped number will be sent out as DTMF
during an active call if the current “map redial key to” parameter is configured to a
number and the “map redial as dtmf” parameter is set to “1”.
For more information on this feature, see “Speeddial Key Mapping” on page5-84.
NA Map redial as conf The “Redial” key remappings has the same behavior as the “Speed Dial” key when the
phone is idle. During an active call the phone will send the custom number as DTMF
using the phone configured DTMF method (inbound vs out-of-band RFC2833 vs SIP
INFO).
When a user presses the Conf key, the mapped number will be sent out as DTMF dur-
ing an active call if the current “map conf key to” parameter is configured to a
number and “map conf as dtmf” parameter is set to “1”.
For more information on this feature, see “Speeddial Key Mapping” on page5-84.