Filter
Top Products
Global SIP Settings
4-70 41-001343-02 REV04 – 05.2014
The “sip subscription timeout retry timer” and “sip subscription failed retry timer” are only configurable through
the configuration files. The “sip subscription timeout retry timer” parameter can be used to control how long the
phone delays then retries a subscription when a SUBSCRIBE request is responded with a 408 (timeout) or 503 (service
unavailable) error code. The “sip subscription failed retry timer” parameter can be used to control how long the phone
delays then retries a subscription when a SUBSCRIBE request is responded with error codes other than 408 or 503.
If any one of the above parameters are configured with a valid setting, the default retry times for all event packages will
be overwritten with the new setting. If the parameters are not configured or contains a invalid setting, the default retry
timers for all event packages will be retained. Both parameters are disabled by default.
Reference
Refer to Appendix A,“Advanced SIP Settings” on page A-82 for a description of each of the above parameters.
For more information about Blacklist Duration and Whitelist Proxy, see Chapter 6, “Configuring Advanced Operational
Features.”
Configuring Advanced SIP Settings
Use the following procedures to configure the advanced SIP settings on the IP phone.
Local SIP UDP/TCP Port (see page4-27) sip local port (see page4-27)
Local SIP TLS Port (see page4-27)sip local tls port (see page4-27)
Registration Failed Retry Timer
Registration Timeout Retry Timer
Registration Renewal Timer
sip registration retry timer
sip registration timeout retry timer
sip registration renewal timer
N/A
N/A
sip subscription timeout retry timer
sip subscription failed retry timer
BLF Subscription Period (see Chapter 5, “Configuring Operational Fea-
tures”)
sip blf subscription period (see Chapter 5, “Configuring Operational Fea-
tures”)
ACD Subscription Period (see Chapter 5, “Configuring Operational Fea-
tures”)
sip acd subscription period (see Chapter 5, “Configuring Operational Fea-
tures”)
BLA Subscription Period (see Chapter 5, “Configuring Operational Fea-
tures”)
sip acd subscription period (see Chapter 5, “Configuring Operational Fea-
tures”)
Blacklist Duration (see Chapter 6, “Configuring Advanced Operational Fea-
tures”)
sip blacklist duration (see Chapter 6, “Configuring Advanced Operational
Features”)
Whitelist Proxy (see Chapter 6, “Configuring Advanced Operational Fea-
tures”)
sip whitelist (see Chapter 6, “Configuring Advanced Operational Fea-
tures”)
XML SIP Notify (see Chapter 6, “Configuring Advanced Operational Fea-
tures”)
XML SIP Notify (see Chapter 6, “Configuring Advanced Operational Fea-
tures”)
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Advanced SIP Settings” on pageA-82.
Aastra Web UI Parameters Configuration File Parameters