Aastra Telecom 41-001343-02 IP Phone User Manual


  Open as PDF
of 876
 
Network Settings
4-44 41-001343-02 REV04 – 05.2014
7. Enter a value for “Type of Service SIP”. Default is 26.
or
Enter a value for “Type of Service RTP”. D ef au lt is 46.
or
Enter a value for “Type of Service RTCP”. Default is 46.
Valid values are 0 to 63.
Note:
If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map the applicable priority to the Protocol setting
as shown in the first table in “DSCP Range/VLAN Priority Mapping” on page4-42 For more information, see the section “Configuring VLAN
(optional)” on page4-45.
8. Press Done (3 times) to save the changes.
Note:
The session prompts you to restart the IP phone to apply the configuration settings
9. Select Restart.
For the 6739i:
1. Press the Options key on the phone to enter the Options List.
2. Press Advanced. A keyboard displays.
3. Enter the Administrator password using the keyboard. Default is “22222”.
4. Press Network.
5.
Press to scroll to the next screen.
6. Press Type of Service DSCP.
7. Press Type of Service SIP, and then enter a value for ToS. Default is 26.
8. Press Type of Service RTP, and then enter a value for ToS. Default is 46.
9. Press Type of Service RTCP, and then enter a value for ToS. Default is 46.
10.
Press until the Options List screen displays.
11. Press Restart to restart the phone for the change to take affect.
For the 6867i:
1.
Press on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is “22222”.
4. Select Network > DSCP.
5. Enter a value for “Type of Service SIP”. Default is 26.
or
Enter a value for “Type of Service RTP”. D ef au lt is 46.
or
Enter a value for “Type of Service RTCP”. Default is 46.
Valid values are 0 to 63.
Note:
If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map the applicable priority to the Protocol setting
as shown in the first table in “DSCP Range/VLAN Priority Mapping” on page4-42 For more information, see the section “Configuring VLAN
(optional)” on page4-45.
IP Phone UI
 previous next