Filter
Top Products
IP Phone Models
41-001343-02 REV04 – 05.2014 1-6
6800i Series
The following are optional accessories specifically for the 6800i Series IP Phones.
The following are optional accessories specifically for the 6865i and 6867i IP Phones.
The M680i module adds 16 additional softkeys to the 6865i and 6867i IP phones and provides paper labels for each
softkey. Up to 3 modules can be daisy-chained to provide up to 48 additional softkeys for the phone. No separate power
adaptor is required as the M680i is powered by the respective IP phone.
M680i Expansion Modules Daisy-Chaining Support
M680i Software Upgrades
The M680i does not require a separate firmware package. M680i software is embedded within the respective phone’s
firmware package.
When the M680i is connected and is powered up, the LED corresponding to the second button on the module will turn
solid red and the module will check to see if an upgrade is required. If it does not have the latest software, the module will
upgrade itself using the phone’s embedded firmware. This process will take approximately 10 seconds, in which case the
LED corresponding to the second button on the M680i will stay solid red for the duration. If the upgrade is successful, the
LED will turn green. If the LED stays solid and red for longer than 10 seconds, the upgrade may have failed. In such scenar-
ios, unplug and reattach the power source from the phone to attempt the upgrade again.
As software upgrades are performed one at a time, each additional M680i connected increases the approximate upgrade
time by 10 seconds (e.g. three connected M680i expansion modules will take approximately 30 seconds to upgrade).
Reference
For more information about installing the 6800i Wall Mount Kit and setting up and using the M680i expansion module, see
the 6800i Wall Mount Kit Installation Guide, the M680i Expansion Module Installation Guide, M680i Expansion
Module Quick Start Guide, your <Model-Specific> Installation Guide, as well as your <Model-Specific> IP Phone User
Guide.
IP Phone Model
Maximum Number of Diasy-Chained
Modules When Powered Via 48V AC Adapter
Maximum Number of Diasy-Chained
Modules When Powered Via PoE
PoE Class
6865i 3 3 Class 2 (< 6.49W)
6867i 3 3 Class 2 (< 6.49W) without modules.
Dynamically switches to Class 3
(< 12.95W) when modules are attached.
6800i Wall Mount Kit
Power Adapter
M680i Expansion Module