Filter
Top Products
Operational, Basic, and Advanced Parameters
41-001343-02 REV04 – 05.2014 A-124
Preferred Line and Preferred Line Timeout
Parameter –
call hold reminder frequency
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the time interval, in seconds, between each ring splash sound on the active line. For
example, if a call comes into Line 1, and then a call comes into Line 2 and you answer Line 2,
Line 1 is automatically placed on hold. While on the active Line 2, after 7 seconds, a ring
splash audio sounds on the line reminding you that the call on Line 1 is still on hold (deter-
mined by the “call hold reminder timer” parameter), and then the ring splash is heard again
after 60 seconds (determined by this parameter).
Notes:
• You must enable the “call hold reminder” and/or “call hold reminder during active calls”
parameter(s), and the “call hold reminder timer” parameter, for this parameter to work.
• A value of “0” prevents additional rings.
Format Integer
Default Value 60
Range 0-4294967295
Example call hold reminder frequency: 50
Parameter–
preferred line
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the preferred line to switch focus to when incoming or outgoing calls end on the
phone.
Format Integer
Default Value 1
Range 0 (none - disables the preferred line focus feature)
1-9
Example preferred line: 2
Parameter–
preferred line timeout
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the time, in seconds, that the phone switches back to the preferred line after a call
(incoming or outgoing) ends on the phone, or after a duration of inactivity on an active line.
Format Integer
Default Value 0 (the phone returns the line to the preferred line immediately)
Range 0-999
Example preferred line timeout: 30