Filter
Top Products
Operational Features
5-102 41-001343-02 REV04 – 05.2014
Configuring XML for Directed Call Pickup
Use the following procedure to configure XML for Directed Call Pickup in the configuration files.
Use the following procedure to configure XML for Directed Call Pickup in the Aastra Web UI.
12. In the "BLF List URI" field, enter the name of the BLF list defined on the BroadSoft BroadWorks Busy Lamp field page for your particular user.
For example, sip:9@192.168.104.13.
Note:
The value of the BLF/List URI parameter must match the list name configured. Otherwise, no values display on the 6757i screen and the fea-
ture is disabled.
13. Select the line state (idle, connected, incoming, outgoing, busy) that you want to apply to the BLF softkey or programmable key.
14. Click Save Settings to save your changes.
Notes:
• Before implementing this procedure, you must create an XML application that the phone uses when the XML softkey
or programmable key is pressed. This XML application must be entered as a URI in the “Value” field of the XML key.
For information about creating an XML script, see the Aastra XML Developer’s Guide.
• You must enable Directed Call Pickup before performing these procedures. See “Enabling/Disabling Directed Call
Pickup” on page5-99.
Configuration Files
To set XML in the configuration files for Directed Call Pickup, see Appendix A, the section, “Softkey/Programmable Key/Keypad Key/Feature
Key/Expansion Module Key/Hard Key Parameters” on pageA-156.
Aastra Web UI
1. Click on Basic Settings->Preferences->Directed Call Pickup Settings.
2. Enable the "Directed Call Pickup" field by checking the check box.
3. (optional) Enter a prefix in the "Directed Call Pickup Prefix" field. For example, *98.
This prefix is appended to the beginning of the Directed Call Pickup number when dialed from the BLF or BLF/List softkey.
4. For the 6739i, 6755i, 6757i, and 6757i CT enable the "Play a Ring Splash" feature by selecting either Enabled (when idle) or Enabled also in
call (when idle and in an active call state. For all other IP phones enable the "Play a Ring Splash" feature by clicking on the checkbox.
(Default is disabled).
If the "Play a Ring Splash" parameter is enabled, the IP phone plays a short "ring splash" when there is an incoming call on the BLF moni-
tored extension.
Note:
This global setting is not dynamic. Changes to this setting will take effect only after the phone has been rebooted.
Aastra Web UI