Filter
Top Products
Operational Features
5-82 41-001343-02 REV04 – 05.2014
Group Paging RTP Settings
An Administrator or User can configure a specific key (softkey, programmable key, or expansion module key) on the
phone that allows you to send/receive a Real Time Transport Protocol (RTP) stream to/from pre-configured multicast
addresses without involving SIP signaling. This is called Group Paging on the IP phones. You can specify up to 5 listening
multicast addresses.
An Administrator can use the following parameters in the configuration files to set Group Paging RTP Settings:
• paging group listening
• softkeyN type, topsoftkeyN type, prgkeyN type, or expmodX keyN type
• sofkeyN label
• softkeyN value, topsoftkeyN value, prgkeyN value, or expmodX keyN value
An Administrator or User can use the following parameters in the Aastra Web UI to set Group Paging RTP Settings:
• Paging Listen Addresses (Path: Basic Settings->Preferences->Group Paging RTP Settings)
• <Paging> Key (Operation->Softkeys and XML, Programmable Keys, or Expansion Module Keys)
Incoming intercom Settings:
1. Click on Basic Settings->Preferences->Incoming Intercom Settings.
2. The "Auto-Answer" field is enabled by default. The automatic answering feature is turned on for the IP phone for answering Intercom calls.
To disable this field, uncheck the box.
Note:
If the Auto-Answer field is not checked (disabled), the phone treats the incoming intercom call as a normal call.
3. The "Microphone Mute" field is enabled by default. The microphone is muted on the IP phone for Intercom calls made by the originating
caller. To disable this field, uncheck the box.
4. The "Play Warning Tone" field is enabled by default. If “Auto-Answer” is enabled, the phone plays a warning tone when it receives in incom-
ing intercom call. To disable this field, uncheck the box.
5. The "Allow Barge In" field is enabled by default. If an active line on the phone receives an incoming intercom call, the active call is put on
hold and the phone automatically answers the incoming intercom call. To disable this field, uncheck the box.
6. Click Save Settings to save your changes.
Note:
The Group Paging RTP Settings are dependant upon the setting for the “Allow Barge In” parameter.
Aastra Web UI