Filter
Top Products
Configuration Server Protocol
4-90 41-001343-02 REV04 – 05.2014
For the 6739i:
IP Phone UI
1. Press the Options key on the phone to enter the Options List.
2. Press the Advanced button. A keyboard displays.
3. Enter the Administrator password using the keyboard. Default is “22222”.
4. Press Cfg. Svr.
5. Press the Download Protocol field, and press the value you want the phone to use for downloading from the configuration server. Valid val-
ues are:
• TFTP (Default)
• FTP
• HTTP
• HTTPS
The IP phone uses the protocol you select to download new firmware and configuration files from the configuration server.
6. After selecting the download protocol, you must identify specific parameters for that protocol. On the Cfg. Svr screen, press the button asso-
ciated with the download protocol you selected in step 6.
7. Use the following table to configure the applicable server.
TFTP Settings
• Press TFTP Server.
• Enter the IP address or fully qualified domain name of the primary TFTP server.
• Press TFTP Path.
• Enter the path name for which the configuration files reside on the TFTP server for downloading to the IP
Phone. If the IP phone’s files are located in a sub-directory beneath the server’s root directory, the relative path
to that sub-directory should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\6757i\configfiles.
• Optional: You can also configure an Alternate TFTP server and Alternate TFTP Path if required by selecting the
“Alternate TFTP” and the “Alt TFTP Path” parameters.
• Press Use Alternate TFTP, and press “Ye s ” to use an alternate TFTP server.
Default is “No”.
• Press Alternate TFTP Server.
• Enter the IP address or fully qualified domain name of the alternate TFTP server.
• Press Alt. TFTP Path.
• Enter the path name for which the configuration files reside on the Alternate TFTP server for downloading to
the IP Phone. If the IP phone’s files are located in a sub-directory beneath the server’s root directory, the relative
path to that sub-directory should be entered in this field. Enter the path name in the form
folderX\folderX\folderX. For example, ipphone\6757i\configfiles.
FTP Settings
• Press FTP Server.
• Enter the IP address or fully qualified domain name of the FTP server.
• Press FTP Path.
• Enter the path name for which the configuration files reside on the FTP server for downloading to the IP Phone.
If the IP phone’s files are located in a sub-directory beneath the server’s root directory, the relative path to that
sub-directory should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For exam-
ple, ipphone\6757i\configfiles.
• Optional: You can enter a username and password for accessing the FTP server if required:
• Press FTP Username.
• Enter a username for accessing the FTP server.
• Press FTP Password.
• Enter a password for accessing the FTP server.