Filter
Top Products
Network Settings
4-50 41-001343-02 REV04 – 05.2014
11. In the PC Port VLAN > PC Port VLAN ID field, enter a value from 1 to 4095 to specify the VLAN ID for the LAN Port. Default is 4095.
Note:
Setting the PC Port VLAN ID to 4095 and LAN Port VLAN ID to any ID from 1 to 4094 will allow frames from the LAN port (containing a VLAN
ID) to be untagged before being forwarded to the PC port and frames from the PC port (without a VLAN ID) to be tagged with the configured
VLAN ID before being forwarded to the LAN port.
Example:
You enable tagging on the phone port as normal but set the PC Port VLAN ID to 4095 and the LAN Port VLAN ID to any ID from 1 to 4094. The
following example sets the LAN port to be on VLAN 3 but the PC port is configured as untagged.
VLAN Settings->VLAN: Enable
VLAN Settings->LAN Port VLAN->LAN Port VLAN ID: 3
VLAN Settings->PC Port VLAN->PC Port VLAN ID: 4095
12. In the PC Port VLAN > Priority field, enter a value from 0 to 7 to specify the PC Port VLAN priority. Default is 0.
13. Press the Save softkey.
14. Restart the phone for the selection to take affect.
Aastra Web UI
1. Click on Advanced Settings->Network->VLAN.
To globally enable/disable VLAN and set priority for non-IP packets:
2. Enable VLAN by checking the VLAN Enable field check box. (Disable this field by unchecking the check box).
3. With VLAN enabled, select the priority (0 to 7) for non-IP packets in the Priority, Non-IP Packet field.
4. Enable or disable VLAN HPQ by checking or unchecking the HPQ Enable field check box.
IP Phone UI