Filter
Top Products
Operational, Basic, and Advanced Parameters
A-23 41-001343-02 REV04 – 05.2014
Parameter –
auto resync time
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the time of day in a 24-hour period for the IP phone to be automatically updated.
This parameter works with TFTP, FTP, HTTP and HTTPS servers.
Notes:
• The resync time is based on the local time of the IP phone.
• The value of 00:00 is 12:00 A.M.
• When selecting a value for this parameter in the Aastra Web UI, the values are in 30-
minute increments only.
• When entering a value for this parameter using the configuration files, the value can be
entered using minute values from 00 to 59 (for example, the auto resync time can be
entered as 02:56).
• Auto-Resync adds up to 15 minutes random time to the configured time. For example,
if the auto resync time parameter is set to 02:00, the event takes place any time between
02:00 and 02:15.
• When the language on the phone is set to French or Spanish, you must enter the time
in the format "00h00" (configuration files only).
Format hh:mm
00h00 (for French and Spanish configuration files)
Default Value 00:00
Range hh = 00 to 23
mm = 00 to 59
Example auto resync time: 03:24
Parameter–
auto resync max delay
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the maximum time, in minutes, the phone waits past the scheduled time before
starting a checksync.
Format Integer
Default Value 15
Range 0-1439
Example auto resync max delay: 20
Parameter–
auto resync days
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the amount of days that the phone waits between checksync operations.
Note:
A value of 0 causes the phone to checksync every time the clock reads the proper time. A
value of 1 forces the phone to wait 24 hours prior to doing the first checksync.
Format Integer
Default Value 0
Range 0-364
Example auto resync days: 1