Filter
Top Products
Operational, Basic, and Advanced Parameters
41-001343-02 REV04 – 05.2014 A-104
Autodial Settings
Global Settings
Per-Line Settings
Parameter –
sip autodial number
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Globally specifies the SIP phone number that the IP phone autodials when the handset
is lifted from the phone cradle. An empty (blank) value disables autodial on the phone.
Format Integer
Default Value Blank
Range Any valid SIP number
Examples sip autodial number: 8500
Parameter –
sip autodial timeout
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Globally specifies the time, in seconds, that the phone waits to dial a pre-configured
number after the handset is lifted from the IP phone cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a pre-configured
number when you lift the handset. If this parameter is set to a value greater than 0, the
phone waits the specified number of seconds before dialing the pre-configured
number (warmline) when you lift the handset.
Default is 0 (hotline).
Format Integer
Default Value 0
Range 0-120
Examples sip autodial timeout: 30
Parameter –
sip lineN autodial number
(N is a line number from 1 to 9)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description On a per-line basis, this parameter specifies the SIP phone number that the IP phone
autodials when the handset is lifted from the phone cradle. Valid values can be:
• -1 (Default): The phone uses the global autodial setting for this line.
• Blank (Empty field): Disables autodial on this line.
• Valid SIP Number: Dials the SIP number specified for this line.
Format Integer
Default Value -1
Range Any valid SIP number.
Examples sip line1 autodial number: 8500