Filter
Top Products
Operational, Basic, and Advanced Parameters
A-119 41-001343-02 REV04 – 05.2014
XML SIP Notify Settings
Polling Action URI Settings
Parameter –
sip xml notify event
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the phone to accept or reject an aastra-xml SIP NOTIFY message.
Note:
To ensure the SIP NOTIFY is coming from a trusted source, it is recommended that you
enable the Whitelist feature (Whitelist Proxy parameter) on the IP phone. If enabled,
and the phone receives a SIP NOTIFY from a server that is NOT on the whitelist (i.e.
untrusted server), the phone rejects the message.
Format Boolean
Default Value 0
Range 0 - disabled
1 - enabled
Example sip xml notify event: 1
Parameter –
action uri xml sip notify
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the URI to be called when an empty XML SIP NOTIFY is received by the phone.
This parameter can use the following variable:
$$LOCALIP$$
Note:
The sip xml notify event parameter must be enabled.
Format HTTP(s) server path or Fully Qualified Domain Name
Default Value Not Applicable
Range Not Applicable
Example action uri xml sip notify: http://myserver.com/myappli.xml
Parameter –
action uri poll
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the URI to be called every "action uri poll interval" seconds.
Format HTTP(s) server path or Fully Qualified Domain Name
Default Value Not Applicable
Range Not Applicable
Example action uri poll: http://myserver.com/myappli.xml