Filter
Top Products
Advanced Operational Parameters
41-001343-02 REV04 – 05.2014 A-206
Boot Sequence Recovery Mode Settings
Single Call Restriction Setting
Parameter –
force web recovery mode disabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the forcing web recovery mode feature. If this parameter is set to "1",
you cannot force web recovery. If this parameter is set to "0", press 1 and # keys during
boot up when the logo displays to force the web recovery mode.
Format Boolean
Default Value 0 (false)
Range 0 (false)
1 (true)
Example force web recovery mode disabled: 1
Parameter –
max boot count
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the number of faulty boots that occur before the phone is forced into Web
recovery mode.
Format Integer
Default Value 10
Range 0 to 32767
Zero (0) disables the max boot count feature.
Example max boot count: 0
Parameter –
two call support
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the single media path restriction between the
6757i CT and 9480i CT base unit and the handset.
When this feature is enabled (set to 1), you can make separate active calls from the 6757i
CT and 9480i CT base unit and from the cordless handset. If this feature is disabled (set to
0), only one call can be active at a time either from the base unit or from the handset.
When this feature is disabled, and you make an active call on either the base unit or the
handset, any other attempt to make an active call is put on hold. Also, when this feature
is disabled, more than one call can negotiate complex audio codecs since only a single
call is decoding audio at a time.
Format Boolean
Default Value 1
Range 0 - Disable
1 - Enable
Example two call support: 0