Filter
Top Products
Operational, Basic, and Advanced Parameters
41-001343-02 REV04 – 05.2014 A-36
The following table identifies the default DSCP-to-priority mapping structure.
PC Port (Ethernet Port 1) Parameters
DSCP Range DSCP Priority
0-7 0
8-15 1
16-23 2
24-31 3
32-39 4
40-47 5
48-55 6
56-63 7
Parameter –
vlan id port 1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows you to configure a VLAN ID that associates with the physical Ethernet Port 1 (PC
port).
Notes:
• Setting the “vlan id port 1” to 4095 and “vlan id” to any ID from 1 to 4094 will allow
frames from the LAN port (containing a VLAN ID) to be untagged before being for-
warded to the PC port and frames from the PC port (without a VLAN ID) to be tagged
with the configured VLAN ID before being forwarded to the LAN port.
Example:
You enable tagging on the phone port as normal but set the “vlan id port 1” to 4095 and
the “vlan id ” to any ID from 1 to 4094. The following example sets the LAN port to be on
VLAN 3 but the PC port is configured as untagged:
tagging enabled: 1
vlan id: 3
vlan id port 1: 4095
• Alternatively setting the “vlan id port 1” to any ID from 1 to 4094 and “vlan id” to 4095
will allow frames from the PC port (containing a VLAN ID) to be untagged before being
forwarded to the LAN port and frames from the LAN port (without a VLAN ID) to be
tagged with the configured VLAN ID before being forwarded to the PC port.
• PC Port parameters are not applicable to the 6730i IP Phone.
Format Integer
Default Value 4095
Range 1 to 4095
Example vlan id port 1: 3