Filter
Top Products
Administrator Level Options
3-35 41-001343-02 REV04 – 05.2014
SIP Settings
The following paragraphs describe the SIP parameters you can configure on the IP phone. SIP configuration consists of
configuring:
• Basic SIP Authentication Settings
• Basic SIP Network Settings
• Advanced SIP settings
• RTP Settings
• Autodial Settings
PC Port Settings (Port 1)
PC Port VLAN ID VLAN ID vlan id port 1 Allows you to configure a VLAN ID that associates with the
physical Ethernet Port 1 (PC port).
For more information, see Chapter 4, “Virtual LAN (optional)”
on page4-41.
Note:
The PC Port parameters are not applicable to the 6730i IP
Phone.
PC Port Priority Priority qos eth port 1 priority Specifies the priority value used for passing VLAN packets
through to a PC via Port 1.
For more information, see Chapter 4, “Virtual LAN (optional)”
on page4-41.
Notes:
• Specific parameters are configurable on a global and per-line basis. You can also configure specific parameters using
the IP Phone UI, the Aastra Web UI, or the configuration files. If you have a proxy server or have a SIP registrar present
at a different location than the PBX server, the SIP parameters may need to be changed.
• The IP phones allow you to define different SIP lines with the same account information (i.e., same user name) but
with different registrar and proxy IP addresses. This feature works with Registration, Subscription, and Notify process-
ing. This feature also works with the following types of calls: incoming, outgoing, Broadsoft Shared Call Appearance
(SCA), Bridged Line Appearance (BLA), conference, transfer, blind transfer.
Parameter In
IP Phone UI
Parameter in
Aastra Web UI
Parameters in Configuration
Files
Description