Filter
Top Products
Operational Features
5-144 41-001343-02 REV04 – 05.2014
topsoftkey1 type: speeddialconf
topsoftkey1 label: Sales
topsoftkey1 value: 5645
topsoftkey1 line: 3
prgkey1 type: speeddialconf
prgkey1 value: 5645
prgkey1 line: 1
expmod1 key1 type: speeddialconf
expmod1 key1 label: Sales
expmod1 key1 value: 5645
expmod1 key1 line: 3
Refer to the following in Appendix A to configure a Speeddial/Conf key on the IP phone using the configuration files.
Configuring the Speeddial/Conf Key Using the Aastra Web UI
Use the following procedure to configure the Speeddial/Conf Key using the Aastra Web UI.
Configuration Files
To set a Speeddial/Conf key using the configuration files, see Appendix A, “Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module
Key/Hard Key Parameters” on pageA-156.
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module Keys.
2. In the “Type” field, select Speeddial/Conf from the list of options.
3. In the “Label” field, enter a key label to assign to the Speeddial/Conf key (for example, “Sales”).
4. In the “Value” field, enter the number that the phone dials when the Speeddial/Conf key is pressed (for example, “4556”).
5. In the “Line” field, select the line for which you want to use the key functionality.
6. For phones with softkeys:
In the States field, select the state(s) (idle, connected, incoming, outgoing, busy) for which you want to use on the key.
Note:
States are not applicable to programmable keys (9143i, 6730i, 6731i, 6735i, 6753i, 6755i, 6863i, 6865i).
7. Click Save Settings to save your changes.