Filter
Top Products
Operational Features
5-200 41-001343-02 REV04 – 05.2014
CFWD in Phone Mode
IP Phone UI
1.
Use the
3 and 4 navigation keys to scroll through each account.
In the above example, account 1 and account 2 are the accounts configured on the phone. Both accounts have CFWD enabled as indicated
by the CFWD All message.
Note:
In Phone mode, when you change the call forward configuration for an account, the change applies to all accounts.
2.
Press the Call Forward key. The Call Forward menu displays. Use the
2 and 5 navigation keys to scroll through each state type.
In the above example, CFWD All is enabled as indicated by a check mark (
), CFWD Busy is enabled but no call forward phone number con-
figured as indicated by a
!, and CFWD No Answer is disabled, as indicated by an X.
3.
Select a state using the
2 and 5 navigation keys.
You can enable/disable a specific account on the phone with any or all of the following states. However, the configuration you set will apply
to all accounts on the phone.
• All: Forwards all incoming calls for the respective account to the specified number.
• Busy: Forwards incoming calls to a specified number if DND has been enabled for that account OR if the account is currently engaged in
another call.
• No Answer: Forwards incoming calls to a specified number if the call has not been answered for the specified number of rings.
Note:
If CFWD All, CFWD Busy, and CFWD No Answer are all enabled (and/or if the account has DND enabled), the CFWD All settings take prece-
dence over CFWD Busy and CFWD No Answer.
You can also use the following keys if required:
• All Off: Disables all CFWD states for the current account in focus
• All On: Enables all CFWD states for the current account in focus
Note:
In Phone mode, the initial configuration you set for an account applies to all the accounts on the phone.
John Smith
CFWD All
Tue Aug 20 2:55pm
L1
J. Smith
CFWD All
Tue Aug 20 2:55pm
L2
Cfwd Mode
1. All
Done Change
Cfwd Mode
2. Busy !
Done Change
Cfwd Mode
3. No Answer X
Done Change
Cfwd Mode
4. All Off
Done Change
Cfwd Mode
5. All On
Done Change
Indicates
Indicates
CFWD Enabled
CFWD Disabled
Indicates
no CFWD
phone number
configured