Filter
Top Products
Operational Features
5-210 41-001343-02 REV04 – 05.2014
4. Press the CHANGE key for the mode you selected in step 2. This displays the Call Forward State screen.
5. Press the CHANGE key in the CFWD State screen. With the cursor in the “State” field, toggle the state ON and OFF by pressing the CHANGE
key.
6. Use the DOWN arrow key to scroll to the “Number” field. Enter a phone number to apply to the current state in focus. When the phone is in
the state you specified, and a call comes into the phone, it forwards the call to the number you specify.
Use the BACKSPACE key if required to delete characters.
7. Use the DOWN arrow key to scroll to the “No. Rings” field. Press the CHANGE key to select the number of rings to apply to the phone for call
forwarding incoming calls. Valid values are 1 to 20. Default is 3.
When the phone receives an incoming call, and call forward is configured on the phone, the phone rings the number of times you specify
in the No. Rings screen, and then forwards the call.
8. Press DONE in the CFWD State Screen to save all changes.
9. Press DONE in the CFWD Mode Screen to save all changes.
Note:
In “Phone” mode, the configuration applies to all the accounts on the phone.
IP Phone UI
State: OFF
Number:
No. Rings: 1
Change
Cancel
AllAccts Done
Call Forward
Mode No Answer
State: ON
Number:5551212
No. Rings: 3
Change
Cancel
AllAccts Done
Call Forward
Mode No Answer
State: ON
Number:
No. Rings: 1
Change
Cancel
AllAccts Done
Call Forward
Mode No Answer
State: ON
Number:5551212_
No. Rings: 1
Backspace
Cancel
AllAccts Done
Call Forward
Mode No Answer
Change
Change the
State
Change the
Number
Change the
No. Rings