Filter
Top Products
Operational, Basic, and Advanced Parameters
A-123 41-001343-02 REV04 – 05.2014
Call Hold Reminder Settings
Parameter –
call hold reminder
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the reminder ring splash timer to start as soon as you put a call on hold
(even when no other calls are active on the phone). When enabled, the phone initiates a
reminder ring splash periodically for the single call on hold. When disabled, no reminder
ring splash is audible.
Format Boolean
Default Value 0
Range 0 (disable)
1 (enable)
Example call hold reminder: 1
Parameter –
call hold reminder during active calls
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the ability for the phone to initiate a continuous reminder tone on
the active call when another call is on hold. For example, when the call on Line 1 is on
hold, and the User answers a call on Line 2 and stays on that line, a reminder tone is
played in the active audio path on Line 2 to remind the User that there is still a call on
hold on Line 1.
When this feature is disabled, a ring splash is heard when the active call hangs up and
there is still a call on hold.
Format Boolean
Default Value 0
Range 0 (disable)
1 (enable)
Example call hold reminder during active calls: 1
Parameter –
call hold reminder timer
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the time delay, in seconds, that a ring splash is heard on an active call when
another call was placed on hold. For example, if a call comes into Line 1, and then a call
comes into Line 2 and you answer Line 2, Line 1 is automatically placed on hold. While on
the active Line 2, after 7 seconds, a ring splash audio sounds on the line reminding you
that the call on Line 1 is still on hold. This timer begins to increment after Line 2 is
answered.
Notes:
• This parameter is used with the “call hold reminder frequency” parameter.
• You must enable this “call hold reminder timer” parameter for it to work.
• A value of “0” disables the call hold reminder feature.
Format Integer
Default Value 7
Range 0-4294967295 seconds
Example call hold reminder timer: 10