Filter
Top Products
Administrator Level Options
3-19 41-001343-02 REV04 – 05.2014
Incoming/Outgoing Intercom Calls
The Incoming/Outgoing Intercom Call settings on the IP Phone specify whether the IP phone or the server is responsible
for notifying the recipient that an Intercom call is being placed. These settings also specify the prefix code for server-side
Intercom calls, and specifies the configuration to use when making the Intercom call.
Parameter in
Aastra Web UI
Parameter in Configuration
Files
Description
Incoming Intercom Settings (all models)
Auto-Answer
Note:
This option can be set by both
Users and Administrators.
sip allow auto answer Enables or disables the IP phone to allow automatic answering for an Intercom call. If
auto-answer is enabled on the IP phone, the phone plays a tone to alert the user
before answering the intercom call. If auto-answer is disabled, the phone treats the
incoming intercom call as a normal call.
For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
Answer and Barge In” on page5-79.
Microphone Mute
Note:
This option can be set by both
Users and Administrators.
sip intercom mute mic Enables or disables the microphone on the IP phone for Intercom calls made by the
originating caller.
For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
Answer and Barge In” on page5-79.
Play Warning Tone
Note:
This option can be set by both
Users and Administrators.
sip intercom warning tone Enables or disables a warning tone to play when the phone receives an incoming
intercom call on an active line.
For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
Answer and Barge In” on page5-79.
Allow Barge In
Note:
This option can be set by both
Users and Administrators.
sip intercom allow barge in Enable or disables how the phone handles incoming intercom calls while the phone
is on an active call.
For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
Answer and Barge In” on page5-79.
Outgoing Intercom Settings (8, 11-Line LCD, and 6739i and 6867i phones)
Type sip intercom type Determines whether the IP phone or the server is responsible for notifying the recip-
ient that an Intercom call is being placed. Applicable settings are Phone-Side, Server-
Side, OFF.
For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
Answer and Barge In” on page5-79.
Prefix Code sip intercom prefix code The prefix to add to the phone number for server-side outgoing Intercom calls. This
parameter is required for all server-side Intercom calls.
For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
Answer and Barge In” on page5-79.
Line sip intercom line Specifies the line for which the IP phone uses the configuration from, when making
the Intercom call. The IP phone uses the first available line for physically making the
call but uses the configuration from the line you set for this parameter.
Note:
The "sip intercom type" parameter must be set with the Server-Side option to enable
the "sip intercom line" parameter.
For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
Answer and Barge In” on page5-79.