Filter
Top Products
Operational Features
41-001343-02 REV04 – 05.2014 5-145
Speeddial/MWI Key
Multiple voicemail registration is supported on the IP phones. This feature can be useful in scenarios where a user needs to
monitor the voicemail accounts of his/her team members or an assistant requires access to his/her manager’s voicemail
messages.
By configuring a softkey, programmable key, or expansion module softkey as Speeddial/MWI and defining call and voice-
mail URIs, users can monitor and listen to pending messages on multiple voicemail accounts. When new messages are
pending on a monitored voicemail account the corresponding Speeddial/MWI key’s LED will blink and the UI (for softkeys)
will display an envelope icon and the number of pending messages beside the defined label.
When a user presses the softkey, the phone will send an INVITE to the configured call URI whereby the user will be able to
listen to the new messages.
Users can configure the Speeddial/MWI key through the Aastra Web UI while Administrators can configure the key
through the Aastra Web UI as well as the configuration files.
Configuring the Speeddial/MWI Key Using the Configuration Files
To configure the Speeddial/MWI key using the configuration files, you must enter “speeddialmwi” for the key type. For the
label, enter a key label to assign to the Speeddial/MWI key (e.g. Peter). For the value, enter in the call URI and voicemail URI
separated by a semi-colon, as per the following syntax: [call URI];[voicemail URI]. For example:
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
For the line, enter the line for which you want to use the key functionality (e.g. 1 through 9).
The following parameters are examples you can use to configure the Speeddial/MWI key using the configuration files:
For Softkeys
softkey1 type: speeddialmwi
softkey1 label: Peter
softkey1 value: +33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
softkey1 line: 3
For Top Softkeys
topsoftkey1 type: speeddialmwi
topsoftkey1 label: Peter
topsoftkey1 value:
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
topsoftkey1 line: 3
For Programmable Keys
prgkey1 type: speeddialmwi
prgkey1 value: +33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
prgkey1 line: 3
Note:
This feature is not supported for the 6735i, 6737i, 6863i, 6865i, and 6867i in Release 3.3.1 SP3.
Note:
For the 6739i IP phone, the Speeddial/MWI key can be configured directly using the IP phone’s UI.
Notes:
• As the example above illustrates, pauses and DTMF are supported for the call URI.
• Ensure that no spaces are added between the call URI and the voicemail URI when defining the key value.
• If only one URI is provided, the value will be used for the voicemail URI and the call URI will be left as undefined.