Filter
Top Products
Operational Features
5-96 41-001343-02 REV04 – 05.2014
Italian Tone Set Cadences
The following are Italian tone set cadences (for “Italy”)
.
Slovak Tone Set Cadences
The following are Slovak tone set cadences.
Configuring Priority Alerting and Ring Tone Cadences using the Configuration Files
Use the following procedures to configure priority alerting and ring tone cadences on the IP phones.
Tone Frequency (Hz) Cadence (on/off)
Dial 425 0.2/0.2/0.6/1.0
Secondary Dial 425 Continuous
Ringing 425 1.0/4.0
Busy 425 0.5/0.5
Congestion 425 0.2/0.2
Call Waiting 425 0.40/0.10/0.25/0.10/0.15
Tone Frequency (Hz) Cadence (on/off)
Dial 425 0.33/0.33/0.66/0.66
Secondary Dial 425 (0.165/0.165)x3 /0.66/0.66
Ringing 425 1.0/4.0
Busy 425 0.33/0.33
Congestion 425 0.165/0.165
Call Waiting 425 0.33 on repeating every 10 sec when Call Waiting
period is set to 10
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the sections,
• “Priority Alert Settings” on pageA-127.
• “Bellcore Cadence Settings” on pageA-131.
Note:
You can configure Bellcore cadences using the configuration files only.