Toshiba CTX28 Telephone User Manual


 
Strata CTX
Configuration
Strata CTX Configuration
Worksheet 3: CO Line
Strata CTX I&M 06/04 2-25
Worksheet 3: CO Line
Main Location _______________ Remote Location 1___ 2___ 3___ 4____5___ 6____
Item # CO Line Type Required
Line
Qty
/X=
PCB
Qty
PCB Name
Slots Required
1
1. Round up fractions to the nearest whole number.
CO1 Analog Loop Start CO Lines with RCOU /4= RCOU 1 Slot/RCOU =
CO2
Analog Loop Start CO Lines with
RCOU/RCOS
/8= RCOU/RCOS 1 Slot/RCOU/RCOS =
CO3
Analog Ground Start CO Lines with
RGLU
/4= RGLU 1 Slot/RGLU =
CO4 Caller ID Line interface with RCIU /4= RCIU 1 Slot/RCIU =
CO5 Caller ID Line interface with RCIU/RCIS /8= RCIU/RCIS 1 Slot/RCIU/IS =
CO6 BVPU VoIP Circuits
2
2. Maximum of five PCBs with CTX670 and two BVPU PCBs with CTX100 because of FCC Part 15 emissions requirement.
/4= BVPU 1 Slot/BVPU =
CO7 Analog Tie Lines with REMU /4= REMU 1 Slot/REMU =
CO8 Analog DID Lines with RDDU /4= RDDU 1 Slot/RDDU =
CO9 T1 Digital Lines with RDTU2 /24= RDTU2 2 Slots/RDTU2 =
CO10 T1 Digital Lines with RDTU2 /16= RDTU2 1 Slot/RDTU2 =
CO11 T1 Digital Lines with RDTU2 /8= RDTU2 1 Slots/RDTU2 =
CO12 IP with BIPU-Q1A /8= BIPU-Q1A 1 Slot/BIPU-Q1A =
CO13 IP with BIPU-Q1A /16= BIPU-Q1A 1 Slot/BIPU-Q1A =
CO14 ISDN and/or QSIG with RPTU or BPTU /23 RPTU2 1 Slot/RPTU2 =
CO15 ISDN and/or QSIG with RPTU or BPTU /16 RPTU2 1 Slot/RPTU2 =
CO16 ISDN and/or QSIG with RPTU or BPTU /8 RPTU2 1 Slot/RPTU2 =
CO17 ISDN BRI Circuit
3
, U-type with RBUU
3. Each ISDN BRI circuit can be configured to provide two CO lines or interface to one BRI station. Each circuit uses 2 CO lines and
2 station ports of system capacity regardless of how it is configured (line or station).
/2= RBUU 1 Slot/RBUU
=
CO18
ISDN BRI Circuits
1
, U-type with RBUU/
RBUS
/4= RBUU/RBUS 1 Slot/RBUU/US =
CO19
ISDN BRI Circuits
1
, S/T-type with
RBSU
/2= RBSU 1 Slot/RBSU =
CO20
ISDN BRI Circuits
1
, S/T-type with
RBSU/RBSS
/4= RBSU/RBSS 1 Slot/RBSU/RBSS =
CO21
E911 CAMA Circuits (RMCS/RCMS=2
circuits, add another RCMS for 4
circuits
/4= RMCU/RCMS 1 Slot/RMCU/RMMS=
CO22 Total Slots required for line PCBs
Miscellaneous CO Line Equipment
CO23
Dealer-supplied NT-1 S/T BRI Line
Circuits
Number of NT-1s No slots required.
CO24
Dealer-supplied CSU for BPTU or
RPTU and/or RDTU2
Number of CSUs No slots required.
CO25 Cable kits for BPTU or RPTU2 Number of RPRI-CBL-KIT No slots required.
CO26 Cable Kits for BPTU or RPTU2 Number of RPRI-CBL-KIT No slots required.
CO27
Secondary Protectors For RDDU and
REMU
Number of Protectors. No slots required.