Toshiba CTX28 Telephone User Manual


 
Strata CTX Configuration
Hardware Compatibility
2-56 Strata CTX I&M 06/04
Stations and
Terminal
Equipment
EKT2000, EKT6000, EKT6500, HDSS,
HDCB
X X NC NC
Existing Proprietary Attendant Console X X NC NC
DK424 PC Attendant X X NC NC
Strata CTX PC Attendant Console, BATI NC NC X X
RPCI (RS-232C) - Data or TAPI X X NC NC
Stations and
Terminal
Equipment
BPCI (RS-232C) - Data or Voice Record TAPI NC NC X X
DKT1000
7
XX X X
DKT2000 X X X X
DKT3000 X
8
X
8
XX
IPT1020-SD NC NC X X
Ethernet LAN AETS NC NC
Used for
ACTU1.
Built-in
ACTU2.
Built-in
V.34 Admin Modem AMDS NC NC X Built-in
Base Cabinet
DKSUB424 or DKSUB280 X NC NC NC
CHSUB672 NC X NC X
CHSUB112 NC NC X NC
Expansion Cabinet
DKSUE424 X NC NC NC
CHSUE672 NC X NC X
CHSUE112 NC NC X NC
Data Cable for Strata DK424 Expansion
Cabinet
XNCNCNC
Data Cable for CTX670 Expansion Cabinet NC X NC X
Data Cable for CTX100 Expansion Cabinet NC NC X NC
Power Supply Unit
RPSU424 (120VAC) X NC NC NC
BPSU672 (120VAC/208VAC/240VAC power
supply)
NC X NC X
APSU112 (120VAC) NC NC X NC
Conduit
Connection Box
RCCB2 X NC NC NC
BCCB120 (120V box) NC X NC X
BCCB240 (240V box) NC X NC X
Battery Distribution
Box
RBDB2 X NC NC NC
BBDB1 (new Battery Dist. Box, 7 BBTC2A-
2.0M)
XXNCX
Power Strip
RPSB1 (120VAC power strip) X NC NC NC
RPSB2 (120VAC power strip) X X NC X
BPSB240 (240VAC power strip) NC NC NC X
Battery Cable
PBTC-3M X X NC X
BBTC1A-2.0M NC X NC X
ABTC-3M NC NC X NC
Battery Charger ABCS1 Built-in Built-in X Built-in
X = Compatible NC = Not Compatible
1. If the BCTU, BEXU or BECU/BBCU replaces the DK424i processors, then the system is upgraded to a CTX670.
2. Jumper plugs on the BWDKU1A determine 8 or 16 DKT circuits and CTX or DK compatibility.
3. If a BIPU-M or BIPU-Q is installed RCOU1A, RCOS1A RDDU1A, RGLU1A, RGLU2A, and two-wire REMU cards should not
be installed to avoid excessive Echo Return Loss (ERL).
4. The RCOS1A cannot be installed on the RCOU3A. The RCOS3 can be installed on the RCOU1A.
5. Requires Release 4.x software.
6. BPTU1, RPTU2, or BIPU-Q1A is required for QSIG Networking.
7. DKT1000-series telephones do not support continuous DTMF tones.
8. Functions as a DKT2000.
Table 2-71 Hardware Compatibility
(continued)
Category Unit Name
DK280 &
DK424
DK424i CTX100 CTX670