Toshiba CTX28 Telephone User Manual


 
IP Telephony and QSIG Over IP
Installing and Operating the SoftIPT
9-22 Strata CTX I&M 06/04
Making a Call
The Toshiba SoftIPT integrates the power of a PC with all of the features available on a DKT3000-
series telephone, except background music. The main difference is that you use a mouse or stylus
to select buttons.
Other than these few differences, you can use most of the features described in the Strata CTX
DKT/IPT User Guide, available on the Internet FYI site, Documentation > User Guides. Refer to
this guide for instructions on using the other features.
³ To make a call
1. Click
Call. Hear dial tone.
(If you have “hot dialing,” skip this
step. Click on a button on the dial
pad and if you hear dial tone, you
have “hot dialing.”)
2. Click or select the on-screen dial
pad buttons to dial a call.
...or if the dialed numbers don’t
appear on-screen, click
Intercom,
then dial by clicking on the dial pad
buttons on-screen.
3. When connected to a call, you can
select any of the call buttons, such
as
Hangup, Redial, Hold or
Conf.
4. Click
Hangup to end the call.
Note Do not use BGM (#490) on the
SoftIPT. It conflicts with
incoming calls.
Switching a Call to Your Headset
You can switch a call from your DKT3000- or 2000-series digital telephone to the SoftIPT by
placing the call on Hold and using the Call Pickup feature.
1. Press
Hold on your digital telephone.
2. On the SoftIPT, dial
#5#72 + the extension number of your digital telephone.
When you are on a call, the Call button changes
to Hangup. Click Hangup to end the call.
6825
If dialed numbers
don't appear,
click
Intercom
,
then dial.
Select or click on
dial pad buttons
to call.