Toshiba CTX28 Telephone User Manual


 
Strata CTX I&M 06/04 2-1
Strata CTX
Configuration
Strata CTX Configuration 2
This chapter contains information and worksheets to help configure the Strata CTX100-S,
CTX100 and CTX670 hardware components. A system overview of the Strata CTX100-S,
CTX100 and Strata CTX670 hardware components and the maximum station and line capacities
available with the system processor is provided.
Worksheets follow this information to aid in determining the actual cabinets and interface PCBs
needed for particular proposals and how these PCBs should be placed in Strata CTX cabinet slots.
(Worksheets begin on page 2-22.)
Strata CTX100-S/CTX100 Overview
The Strata CTX100-S/CTX100 systems are
compact systems, yet they provide large system
features (see Figure 2-1 and Table 2-1). It is
designed for wall mounting and occupies very
little space.
They are designed for wall mounting and
occupy very little space.
The CTX100 processor (ACTU2A) comes with
32 ports (licensed) and can grow to 112 ports
by adding 4-port licenses.
The CTX100-S processor (ACTU2A-S) comes
with 16 ports (licensed) and can grow to 32
ports by adding two eight-port licenses. Then, it
can grow to 112 ports with four-port licenses.
Note The Strata CTX100-S and CTX100
system capacities depend on the licenses
stored on the system processor and the hardware described in this chapter. See “CTX100-S/
CTX100 License Control” on page 2-4.
Important! The Strata CTX100-S uses the same hardware and configuration as the Strata
CTX100, with a few exceptions. Whenever the CTX100 is mentioned in this book, it
applies to both the CTX100-S and CTX100, unless specified otherwise.
Each ACTU2 basic processor can be configured with a one or two cabinet system. A single (Base)
cabinet system supports a combination of up to 64 Central Office (CO) lines and stations, while a
two cabinet system (Base and Expansion) can support up to 112 CO lines and stations.
System line and station capacity is expanded by adding CO line and station Printed Circuit Boards
(PCBs) and port licenses into its universal slot architecture.
5976
Base Expansion
Figure 2-1 CTX100-S /CTX100
Base/Expansion Cabinets