Filter
Top Products
Station Apparatus
Cordless Telephone Installation
11-36 Strata CTX I&M 06/04
Step 6: Wall Installation (Optional)
Important! You must place your DKT3000-series telephone into 2000-mode before connecting
the cordless telephone; otherwise, the 3000-series telephone will not work. See
“Place DKT3000-series Telephones into 2000-Mode” on page 33 for instructions.
Standard Wall Plate Mounting
These telephones are designed to be mounted on a standard wall plate. To attach the wall mount
stand to the base unit:
1. Select a wall location near a 120VAC outlet and within reach of the Strata CTX digital line
connection.
2. Slide the wall mount stand into the notches at the top of the
base unit, push the wall mount stand down and snap it into
place (shown right).
3. Plug the AC adapter into the base unit.
4. Place the AC adapter cord inside the molded channel of the
wall mount stand.
5. Plug one end of the telephone cord into the LINE jack on
the base unit. Optionally, plug one end of a Strata DKT
telephone into the PHONE jack. Then place the telephone
cord(s) inside the molded channel(s) on the bottom of the
wall mount stand.
6. Plug the other end of the telephone cord into the modular wall jack.
7. Place the base unit on the posts of the wall plate and push down
until it’s firmly seated (shown right).
8. Plug the AC adapter into a standard 120VAC wall outlet.
Note Do not use an outlet controlled by a wall switch.