Toshiba CTX28 Telephone User Manual


 
Station Apparatus
Cordless Telephone Installation
Strata CTX I&M 06/04 11-35
Station Apparatus
Step 5: Connect and Apply Power
Base Unit
1. Plug the AC adapter cord into the AC adapter input jack on
the base unit (shown at right).
2. Plug the AC adapter into a standard 120VAC wall outlet.
3. Check to see that the power LED is on.
Charging Unit
1. Plug the AC adapter cord into the input jack on the charging
unit (shown at right).
2. Plug the AC adapter into a standard 120VAC wall outlet.
3. Check to see that the
CHARGE LED is on.
Note You can place the handset in the charging unit with or
without the belt clip attached.
Important!
Use only the supplied AC adapter.
If the CHARGE LED on the charging unit and/or the
POWER LED on the base unit do not light, return everything
to your Authorized Dealer.
Always route the power cord where it is not a trip hazard, and
where it cannot become chafed and create a fire or electrical
hazard.
DKT2204-CT (pictured)