Filter
Top Products
Station Apparatus
Cordless Telephone Installation
11-40 Strata CTX I&M 06/04
Step 10: Install Headset (Optional)
The optional headset provides a hands-free option. With the headset installed, you can use the belt
clip to carry the handset and conduct a conversation. All feature operations remain the same except
the handset earphone and microphone are disconnected.
³ Open the cover over the headset jack that is located on the top
of the handset and plug in the headset as shown at right.
Important! Only use headsets especially designed or modified
for use with radio frequency equipment.
Step 11: Attach Belt Clip (Optional)
Note The belt clip is designed to fit snugly onto the handset.
1. Snap the tab out of the belt clip notch on the top of the handset.
2. Slide the belt clip into the space where the belt clip tab was, carefully
aligning the belt clip sides to the notches.
3. Press firmly until it snaps into place.
4. Use the belt clip to attach the handset to your belt or pocket.
³ To remove the belt clip
1. Press the retaining clip in toward the belt clip blade and slide the clip up at
the same time.
Reinstall the cover tab.