Filter
Top Products
Station Apparatus
Telephone Settings
11-20 Strata CTX I&M 06/04
Msg LED On: Msg operates as Feature Button
Msg LED Off: Works as a Msg button.
4. Press
Hold to set the option.
5. Go off-hook, then on-hook to exit the program mode.
Test the Display on Large LCD Telephones (DKT3014-SDL only)
1. Press
3+6+9+Hold (simultaneously).
2. Press
Page.
3. Press
1. LCD screen is blank.
4. Press
2. Each segment shows three vertical lines, in all eight rows.
5. Press
3. Each segment contains five short horizontal lines, in all eight rows.
6. Press
4. Each segment contains a pattern of small dots, in all eight rows.
7. Press
5. All of the available characters, including numbers, display.
8. Go off-hook, then on-hook to exit the program mode.
Country Settings On/Off
This procedure enables you to change the country settings for telephone CODEC operation in
various countries, see Table 11-7.
1. Press
3+6+9+Hold (simultaneously).
2. Press
*
.
3. Press Feature Buttons 1~4 (FB1~FB4) On/Off according to the Table below
...or, for the DKT3001, pressing
1~4 and toggle the Msg LED On/Off (see following)
press
1 (Msg LED Off means that FB1 is Off)
press
2 (Msg LED Off means that FB2 is Off)
press
3 (Msg LED Off means that FB3 is Off)
press
4 (Msg LED Off means that FB4 is Off)
4. Press
Hold to set the option.
5. Go off-hook, then on-hook to exit the program mode.
Note On the DKT3001, the Msg LED shows if the feature has been turned On/Off. There is no
visible indication on the other telephones. If the telephone ringer and busy tone buzzes or
doesn’t sound clear, check the country settings.
Table 11-7 Country Code Settings for Mu Law/A Law
Country FB1 FB2 FB3 FB4
USA, Canada (default is Mu Law) Off Off Off Off
Mexico Off Off Off On
Taiwan On Off Off Off
Hong Kong, Thailand Off On Off Off
Singapore, Malaysia, Indonesia, Sri Lanka, India,
China
On On Off On