Filter
Top Products
Station Apparatus
Telephone Wall Mounting
Strata CTX I&M 06/04 11-27
Station Apparatus
Figure 11-23Tilt Stands in Raised Position for DKT and Two ADMs
Telephone Wall Mounting
This section explains how to mount digital telephones to a wall. See the manufacturer’s
documentation for instructions on mounting standard phones.
Notes
● Digital telephones equipped with BPCIs or PDIU-DI2s cannot be wall mounted.
● DKT3014-SDL equipped with a BHEU cannot be wall-mounted.
● 2000-series digital telephones with headsets can only be wall mounted with an HHEU2.
³ To mount digital telephones
Refer to Figures 11-24~11-26 and the following
steps.
1. Loosen the captive screws, and remove the
telephone base.
2. Using a suitable cutter, remove the handset
hanger from the base.
3. Insert the handset hanger in the slot on the front
of the phone. The hanger fits in the notch on the
handset cradle.
4. Rotate the telephone base 180 degrees and
secure it to the telephone with its four captive
screws.
Note Tilt up the LCD of the DKT3014-SDL before
fixing the base.
5849
Handset Hanger
Plastic Tab
1478
Figure 11-24 Removing the Telephone Base