Toshiba CTX28 Telephone User Manual


 
Rack Mount Cabinets
AC Cabling
Strata CTX I&M 06/04 5-33
Rack Mount Cabinets
AC Cabling
Note 1, 2 or 3 power strips are used depending on how many cabinets are installed (see diagrams
shown below.
Figure 5-14 AC Cabling (One to Five Cabinets)
Back View
Four or five cabinets - one AC cord exits system
Cabinet 1 Power
Supply
Cabinet 2 Power
Supply
Cabinet 3 Power
Supply
Cabinet 4 Power
Supply
Cabinet 5 Power
Supply
Front View
Back View
One cabinet - one AC cord exits system
Cabinet 1 Power
Supply
Cabinet 2 Power
Supply
Two cabinets - two AC cord exit system
Note 2
(120VAC only)
Note 2
(120VAC only)
Notes 1, 2
(120/208/240VAC)
Cabinet 1 Power
Supply
Front
Four or five cabinets - two AC cord exits system
Cabinet 1 Power
Supply
Cabinet 2 Power
Supply
Cabinet 3 Power
Supply
Cabinet 4 Power
Supply
Cabinet 5 Power
Supply
Front View
Back View
Two or three cabinets - one AC cord exits system
Notes 1, 2
(120/208/240VAC)
Cabinet 1 Power
Supply
Cabinet 2 Power
Supply
Cabinet 3 Power
Supply
BRPSB240A
(208/240VAC)
or
BRPSB120A
(120VAC)
Front View
Notes
1. 120VAC cord is supplied with cabinet. A special cord, BACL240A, must be ordered for each cabinet if 208VAC
or 240VAC is used.
2. Power Strips must plug into the following AC outlets: 120VAC to NEMA 5-15R, and 208/240VAC to NEMA 6-20R.
3. If four cabinets are installed only one BRPSB120A is required. You can plug the fourth cabinet
power supply directly into the 120VAC outlet.
Front
7002
BRPSB240A
BRPSB240A
(208VAC
or 240VAC only)
Notes 1, 2
BRPSB120A
BRPSB120A
(120VAC only)
Notes 3
Note 2
(120VAC only)